BLDC Motor for Turnstile Systems
Advanced brushless motor solutions for turnstile access control systems, delivering smooth motion, fast response, and long service life — with FOC control and a controller you can integrate directly.
What a Turnstile Motor Has to Do
A turnstile motor runs a short, violent duty: it accelerates an arm or flap in a few hundred milliseconds, holds position against a push, then does it again — thousands of times a day, for years, in a lobby or a metro hall.
That duty is why FOC-controlled BLDC motors replaced brushed drives in access control. Torque stays smooth at low speed, there are no brushes to wear out, and the controller can report position back to the gate logic.
- Smooth torque at start and stop, so the arm does not slap at the end of travel
- No brush dust or brush wear, which matters in enclosed pedestals
- Position and speed feedback available to the turnstile controller
What we build for access control
- 24 V / 36 V / 48 V BLDC motors, 50 – 500 W
- FOC control, with or without integrated driver
- Planetary or worm gearbox where the arm needs torque
- 60 mm gate-machine motor already on file (see downloads)
Turnstile Types We Support
The three common mechanisms differ in stroke, arm mass and how often they are pushed through. The motor and gearbox follow from that.
Flap Barrier
High-speed access control systems.
Short stroke, high cycle count — response time dominates.
Swing Gate Turnstile
Smooth and silent swing gate operation.
Heavier arm, longer travel — torque and damping matter.
Tripod Turnstile
Reliable and cost-effective systems.
Rotating mass, mechanical detent — gearbox and index accuracy matter.
Common Turnstile Failures and What Fixes Them
Four complaints come up again and again in access control service calls. Each one traces back to the drive.
Unstable motion
Inconsistent movement affects user experience.
Fix: FOC control keeps torque smooth through start and stop, so the flap or arm moves the same way every cycle — that is our Smooth Motion build.
Noise problems
Not suitable for indoor/public spaces.
Fix: Brushless commutation removes brush and commutator noise; a geared build with the right ratio keeps the motor in its quiet speed band. That is our Low Noise build.
High maintenance
Short motor lifespan increases cost.
Fix: No brushes to replace and no brush dust inside the pedestal. Service life is quoted per project against your cycles per day — Long Lifespan.
Slow operation
Limits traffic flow efficiency.
Fix: Low rotor inertia plus a controller tuned for the arm mass shortens the open/close cycle — Fast Response.
Recommended Motor Solutions
24V–48V BLDC Motor
Standard for most turnstile systems.
FOC drive, 50 – 500 W.
Geared BLDC Motor
Higher torque for heavy-duty systems.
Planetary or worm reduction at the arm shaft.
Integrated Motor + Controller
Compact plug-and-play solution.
Shorter harness, fewer connectors in the pedestal.
Custom OEM Motor
Tailored to your system design.
Winding, shaft, connector and label to your drawing.
BLDC Motor for Turnstile — Technical Specifications
Range we quote for turnstile drives, followed by one real model from our current drawing set.
| Parameter | Specification |
|---|---|
| Voltage | 24 V / 36 V / 48 V |
| Power | 50 W – 500 W |
| Control mode | FOC |
| Noise level | Stated per project, dB(A) at test distance |
| Service life | Stated per project, cycles at rated load |
| GSBLD60S40D24-60G100K | 60 mm gate motor, on file |
|---|---|
| Rated voltage | 24 V DC (21 – 30 V) |
| Motor type | BLDC, inner rotor, 3-phase 8-pole |
| Rated power | 40 W |
| Rated torque | 9.3 N·m at 30 rpm |
| Rated current | 3 A max. |
| Weight | 1410 ± 30 g |
| Drive | Requires the dedicated controller |
The 60-gate motor above is a 40 W build from an existing drawing set — the 50 – 500 W range covers what we quote for new turnstile projects. Send the arm mass, opening time and voltage and we return the matching drawing set.
Where These Motors Run
Metro Stations
Continuous cycle counts, no tolerance for a slow gate.
Airports
Mixed traffic, long operating hours, security integration.
Office Buildings
Quiet operation close to reception and meeting rooms.
Stadiums
Burst throughput at entry and exit peaks.
Government Facilities
Duty, tamper resistance and service documentation.
Commercial Centers
Public-facing reliability with minimal service visits.
Why Choose Our Turnstile Motor Solution
Stable Performance
Reliable in high-frequency environments.
Quiet Operation
Perfect for indoor installations.
Compact Design
Easy integration into systems.
OEM Capability
Full customization support.
OEM & Custom BLDC Motor for Turnstile Solutions
We provide customized BLDC Motor Solutions based on project requirements:
- Torque and speed customization
- Motor + controller integration
- Private labeling
- System-level engineering support
We support
- Prototype development
- Small batch production
- Large scale OEM manufacturing
Our Manufacturing Capabilities
Greensky supports OEM and ODM development for BLDC motor application manufacturers.
Motor Production Line
Advanced motor production lines ensure consistent quality and high production capacity for BLDC motor application manufacturers.
Motor Testing Laboratory
Professional motor testing equipment verifies torque, efficiency, durability and performance before shipment.
Quality Inspection
Strict quality inspection procedures ensure each motor meets international standards and customer specifications.
OEM Production
Flexible OEM manufacturing supports custom BLDC Motor solutions for BLDC motor application manufacturers.
Why Choose Greensky as Your Motor Manufacturer
Greensky is a professional electric motor manufacturer specializing in motion control solutions. Our strengths include:
- Strong R&D team
- Advanced motor manufacturing equipment
- Strict quality control
- OEM customization capability
- Global export experience
We work with BLDC Motor Application manufacturers worldwide to develop reliable motor solutions.
Get Your Turnstile Motor Solution
What to include in your message
- Turnstile type — flap barrier, swing gate or tripod, and single or double motor.
- Arm or flap — mass, length and opening angle.
- Cycle time — required open/close time, and passes per hour at peak.
- Supply and control — 24 V, 36 V or 48 V, and whether you take a bare motor or motor + controller.
- Order plan — sample quantity, annual volume and OEM branding needs.
Send an inquiry
Send a drawing or a short brief — we reply with a motor proposal within 24 hours.
FAQ – BLDC Motor for Turnstile
Why use BLDC motors for turnstiles?
They provide smoother motion, lower noise, and longer lifespan compared to traditional motors. With FOC control the torque stays even through the open and close stroke, so the arm does not slap at the end of travel.
What voltage is typical?
24 V and 48 V are the most commonly used. 36 V builds are also available, and the winding is set to the supply you already have in the pedestal.
Can you provide complete solutions?
Yes, motor + controller integration is available. The 60-gate motor on this page is specified against its dedicated controller, so the pair is matched when we quote.
Do you support OEM projects?
Yes, we offer full customization: torque and speed, motor + controller integration, private labeling and system-level engineering support, from prototype through small batch to volume.
Looking for a Turnstile Motor Supplier?
Greensky Power is committed to becoming your reliable long-term motor manufacturing partner in Europe. Whether you need standard models or fully customized OEM solutions, we are ready to support your project.
Professional response guaranteed within 24 hours. Add.: No.597 Bin’an, Hangzhou, China 310052 · E-mail: mkt@greensky-power.com · TEL: +86 571 8819 5488
