Motorredutor AC com controle de velocidade

Generais：

Looking for a reliable, high-torque motion solution with precise speed control for your automation equipment? Greensky provides integrated AC gear motor systems, combining robust motors, precision gearboxes, and intelligent controllers for seamless performance in conveyors, misturadores, and lifting equipment. This guide helps you select the optimal system for your needs. Engrenagem de controle de velocidade CA Motor É uma unidade do controlador e motor. Só precisa se conectar uma vez. A velocidade pode ser facilmente ajustada pelo potenciômetro. O controlador é fixo com loop de controle de velocidade, capacitor, ENATENÇÃO DE VELOCIDADE E ETC. Não há função da parada instantânea na unidade.

Personagens：

Integrated Design: Motor, caixa de velocidade, and controller are pre-matched and tested as a complete system, ensuring optimal performance, confiabilidade, and simplified procurement.
Precise Speed Regulation: Achieve and maintain stable output RPM even under varying loads, thanks to advanced control methods like Variable Frequency Drive (VFD) tecnologia.
High Torque at Low Speed: The gearbox multiplies the motor’s torque, delivering high starting and running torque directly at the output shaft, ideal for driving heavy loads at low speeds.
Expert Technical Support: Our engineering team provides direct support to help you select the correct configuration, ensuring the system meets your application’s exact requirements.

Motor de engrenagem CA com características técnicas de controle de velocidade

Selecting Your AC Gear Motor System: Key Specifications

Use the table below to define your application requirements. This will guide you in specifying the right system for your needs.

Parâmetro	Por que é importante	Greensky’s Options
Velocidade de saída	Determines the cycle time of your process.	0.1 – 300 RPM (Fully customizable)
Torque de Saída	Determines the load-driving capability of the system.	10 – 5000 N.m (Wide range available)
Control Signal	How you interface with and command the motor.	0-10V / 4-20mA / PWM / Potentiometer
Relação de engrenagem	Defines the speed reduction and torque multiplication.	5:1 para 2000:1
Potência do motor	Overall power capacity of the system.	25C – 1100C (1/30 HP to 1.5 HP)

How to Achieve Speed Control in AC Gear Motors

Understanding the method of speed control is key to selecting the right system. The two primary methods are:

Voltage Regulation (for Small Universal Motors): This method is simple and cost-effective. It adjusts the motor’s speed by varying the input voltage. No entanto, it offers limited speed range and torque can drop significantly at lower speeds. It is suitable for low-power applications where precise control is not critical.
Frequency Inverter (VFD) Ao controle (for Induction Motors): This is the preferred and technologically advanced solution for industrial applications. Uma unidade de frequência variável (VFD) controls the motor’s speed by varying the frequency and voltage of the electrical supply. This method provides:
- Alta Precisão: Excellent speed stability under changing loads.
- Alta eficiência: Saves energy, especially at reduced speeds.
- Full Torque Capability: Can provide high torque even at low speeds.
  Greensky specializes in providing integrated AC gear motor systems with VFD control for superior performance.

Common Applications for Speed-Controlled AC Gear Motors

Our systems are engineered for reliability in a wide range of industrial automation tasks.

Industrial Conveyors: Precisely control the line speed for synchronizing production processes, indexing, and adjusting to different product types.
Mixing & Agitating Equipment: Adjust the mixing or agitating speed for different viscosities of materials, from thin liquids to thick pastes, ensuring consistent product quality.
Máquinas de embalagem: Provide synchronized motion for filling, capping, and labeling operations, where accurate speed is crucial for efficiency and precision.